![]() ![]() ![]()
To do that, connect a computer directly to the Vigor 130 modem's LAN port and the PC should receive an IP address in the 192.168.2.x range (if not, set the PC's IP address to 192.168.2.10). If your ISP is using DHCP or a Static IP address instead of PPPoE, the Vigor 130 modem needs to be reconfigured to pass that type of connection through to the device behind it. Once the router is back online, it should re-detect and show a green indicator light to indicate that it now has internet access:Ĭlick on the Internet tab then the TCP/IP tab to see the IP address for the connection: While the Apple AirPort router is restarting, plug the Vigor 130's ethernet port into the WAN port of the Apple AirPort router. ![]() If after clicking Update, the router reports problems, click Ignore this problem for those so that the router can restart and apply the changes: #Airport utility vpn update#The Service Name field should be left blank.Ĭlick Update to apply the connection changes. #Airport utility vpn password#On the Internet tab of the AirPort Utility, set the Connect Using setting to PPPoE.Įnter the Username and Password for the internet connection using the details that the ISP have supplied. It should show the current Connect Using setting as Ethernet and it will have an IP address in the 192.168.2.x range to indicate that it has received a local IP from the Vigor 130 modem: Go to the Internet tab to configure that connection. That will go into the settings for the router and it should show an orange status light / symbol to indicate that it has no internet access. #Airport utility vpn manual#Select the router and click the Edit or Manual Setup button depending on the version of the AirPort Utility that you are using. To configure the Apple AirPort, open the AirPort Utility and the router should show in the list of detected devices. ![]() It is recommended to leave the modem unplugged from the AirPort router until the settings have been changed using the AirPort utility. Once the AirPort router has finished updating, the status LED on the AirPort router should light in green to indicate that it has established an internet connection: To do this, connect the Vigor 130's ethernet port to the AirPort router's WAN (circular icon) port. Step 8: Connect the Vigor 130 modem to the AirPort router now. The AirPort router will show as Updating in the utility while it applies the changes. Step 7 : The utility will then pop-up a warning that the AirPort router will be unavailable while applying the changes, click Continue: On the Internet tab, set the Connect Using method to PPPoE and enter the ISP Username in the Account Name then enter the Password for that account.ĭo not enter a Service Name, it is not required for this connection type: Step 5: The AirPort router should now show as a configurable device, click on the icon of the router and click Edit: Step 4: Do not connect the modem to the router at this stage, simply click Next: Step 3: That will go into the initial setup for the AirPort router, set the name, enter a suitable password for the router and click Next: Otherwise, the router should show in the list of detected devices under the Other Wi-Fi Devices menu: If the router is already detected, skip to Step 5. Step 2: To configure the Apple AirPort, open the AirPort Utility from Finder > Utilities. Step 1: Connect the Vigor 130 modem to the VDSL2 line using the DSL port, the DSL LED will be lit solidly when the VDSL2 connection has established.ĭo not connect its ethernet port to the Apple AirPort router at this stage.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |